Heavy-duty containers for office floors and large partitioned spaces. EC2 L heavy-duty trays are self-supporting and rest on an exposed C-rail frame. The panels are fitted with an acoustic complex combining absorption (mineral wool) and insulation (plasterboard). These ceiling solutions prevent the transmission of noise between adjacent rooms. The panels, with sharp, abutting edges, have Z-shaped folds at each end to rest on the load-bearing profiles.
A safety fold is provided at the end to ensure that the panels remain firmly attached to the framework. The surface of the panels is flush with that of the supporting profiles. Technical equipment can be integrated by factory-cutting the complex.
Office floors, meeting rooms requiring lateral isolation
Galvanized steel 0.5 to 0.8 mm thick, depending on bin width.
Standard widths 300 / 600 / 675 mm
Other widths on request.
Length within self-supporting limits (675 x 1800 mm maximum)
– Prepainted 137 white (similar to RAL 9003)
– Post lacquered polyester powder paint RAL :
– All other RAL colors on request
Rapport CSTB EMI 18-26077242-1 :
Up to 88% post-lacquered RAL 9016
Overview in the Finishes section of the catalog
Reaction to fire (according to EN 13501-1)
Euroclass A1 for products :
– Unperforated pre-painted trays
– Pre-painted trays with non-woven fleece or surfaced rock wool lining
Euroclass A2-s1,d0 for products :
– Post-lacquered trays with or without lining
On request :
Special cut-outs for luminaires and HVAC equipment
Activation of hot/cold mode trays
Metal ceilings are durable and easy to clean.
For dust: Dry cleaning with a soft cloth or vacuum cleaner with soft bristle brush.
For stains: Clean with a damp cloth soaked in a non-abrasive cleaner diluted in water. For persistent, greasy stains, diluted alcoholic solutions can be used.
100% recyclable ceiling, odorless, easy to maintain and non-generating of dust, particles or vapor.
No COV or formaldehyde emissions.
(Class A for rockwool-based trays).
FDES sheet available on the INIES website (www.inies.fr).
Installation in accordance with DTU 58.1
Frames: Trays on C-rails (various widths, with or without shadow gap)
Suspended at 1200 mm centres, starting 300 mm from the wall. The length of the panel determines the center-to-center distance between the supporting profiles.
Edges: Panels are installed on simple angle irons or hollow joints, or on runners.
Disassembly: Open by pushing vertically.
1- Bac EC2 BRZ L
2- REC L edge angle
3- Rail C PREC C
4- Track hanger C SUSP C
5- Splice rail C RACC C