The self-supporting EC2 CLIP tray is designed for indoor or outdoor use, with a clip-on system that allows large panels to be installed.
The jointed sharp-edged panels are removable, with a longitudinal seam on one side and a crushed fold on the other.
They are hooked under load-bearing profiles notched to the width of the long-span bins.
The self-supporting EC2 CLIP tray is designed for indoor or outdoor use, with a clip system that allows the use of large-format panels.
The jointed, sharp-edged panels are removable, with a longitudinal seam on one side and a crushed fold on the other.
They can be clipped under load-bearing profiles notched to the width of the long-span panels.
Hall, outdoor walkways, courtyards…
Galvanized steel 0.6 or 0.7 mm.
Standard widths 300 mm
Lengths up to 6000 mm under carriers at a maximum distance between centres of 1200 mm for indoor use.
Straight butt joint for butt joints.
– Pre-painted white 137 (similar to RAL 9003)
– Post-lacquered polyester powder paint RAL :
– All other RAL colors on request
Report CSTB EMI 18-26077242-1 :
Up to 88% post-lacquered RAL 9016
Summary in the Finishes section of the catalog
Reaction to fire (according to EN 13501-1)
Euroclass A1 for products :
– Unperforated pre-painted sheets
– Pre-painted sheets with non-woven fleece or rockwool lining
Euroclass A2-s1,d0 for products :
– Post-painted trays with or without lining
On request :
Special cut-outs for luminaires and HVAC equipment
Metal ceilings are durable and easy to clean.
For dust: Dry cleaning with a soft cloth or vacuum cleaner with soft bristle brush.
For stains: Clean with a damp cloth soaked in a non-abrasive cleaner diluted in water. For persistent, greasy stains, diluted alcoholic solutions can be used.
100% recyclable ceiling, odorless, easy to maintain and non-generating of dust, particles or vapor.
No VOC or formaldehyde emissions.
(Class A for rockwool-based trays).
EHDS sheet available on the INIES website (www.inies.fr).
Installation in accordance with DTU 58.1
Frames: Clip-on panels overlapping invisible PREC CLIP-type framing.
Hanger spacing 1200 mm, starting 300 mm from the wall. Track spacing up to 1200 mm indoors (900 mm maximum recommended outdoors). In the case of wide installations with several panels installed end-to-end, provide a straight, raised end across the width to ensure that the panels are perfectly flush with each other.
Edges: Install panels on REC L angle or REC U runner edge profiles for better support. The panel is clipped to the bottom of the angle on one side, then translated to overlap
the opposite angle.
Dismantling: Trays cannot be easily dismantled. Start with the end panel in the opposite direction of installation.
1- EC2 CLIP pan
2- REC L edge angle
3- Supporting profile clip PREC CLIP
4- RACC CLIP load-bearing profile connector