- Product description
- Features
- Installation method
Description
Economical, self-supporting, open-ended trays on exposed edge profiles, installed in walkways only.
The trays are made of 5/10th-thick sheet steel, perforated or unperforated, with a wide choice of colors.
The trays are open at both ends, with sharp, abutting edges.
Self-supporting tubs on exposed frames rest on self-supporting edge angles.
Usage
Circulation, corridors. Sanitary facilities, small premises requiring self-support.
The materials
0.5 galvanized steel.
Formats
Standard widths 300 mm
Lengths within self-supporting limits
(2400 mm maximum)
Colors
– Pre-painted white 137 (similar to RAL 9003)
– Post-lacquered polyester powder paint RAL :
– All other RAL colors on request
Light reflection
Report CSTB EMI 18-26077242-1 :
Up to 88% post-lacquered RAL 9016
Summary in the Finishes section of the catalog
The fire
Reaction to fire (according to EN 13501-1)
Euroclass A1 for products :
– Unperforated pre-painted sheets
– Pre-painted sheets with non-woven fleece or rock wool filling
surfaced
Euroclass A2-s1,d0 for products :
– Post-painted trays with or without lining
Acoustics
Sound absorption measured in accordance with NF EN ISO 354.
Acoustic certificates on request
Acoustic certificates on request
Perforations
Standard :
On request :
Options
Special cut-outs for lighting fixtures and HVAC equipment.
Fire-resistant (SF) tray.
Long BJR edge for overlap between trays.
Cleaning
Metal ceilings are durable and easy to clean.
For dust: Dry cleaning with a soft cloth or vacuum cleaner with soft bristle brush.
For stains: Clean with a damp cloth soaked in a non-abrasive cleaner diluted in water. For persistent, greasy stains, diluted alcoholic solutions can be used.
The environment
100% recyclable ceiling, odorless, easy to maintain and non-generating of dust, particles or vapor.
No VOC or formaldehyde emissions.
(Class A for rockwool-based trays).
EHDS sheet available on the INIES website (www.inies.fr).
All special profiles available on request
Installation according to DTU 58.1
Installation in traffic only.
Edges: Panels are installed on single angle, hollow joint or sliding rails.
Dismantling: Open by pushing vertically on the panel.
1- EC2 BO tray
2- REC L edge angle
Design and manufacture of ceilings, partitions and metal cladding for ceiling and partition builders.
40 years of know-how – French manufacturing – Reactivity and flexibility – Factory direct Haut de France